Resetting to stock configuration
This page provides instructions for resetting settings back to a stock vehicle configuration.
Last updated
Was this helpful?
This page provides instructions for resetting settings back to a stock vehicle configuration.
Last updated
Was this helpful?
WARNING: The instructions below only apply to PRISM Sky aircrafts on AOS version 1.3.1 or higher. DO NOT attempt this if your PRISM Sky aircraft is on AOS version below AOS 1.3.1.
Although it is highly recommended not to change the default vehicle parameters, in the event you want to reset your PRISM Sky back to its stock vehicle configuration please follow the instructions below.
Power on the Ground Control Station.
Open Watts AMC
Power on PRISM Sky (arms folded)
Once connected to the aircraft, switch to Advanced Mode by clicking or tapping on the orange Auterion logo five (5) times.
Select switch to Advanced Mode to confirm.
The Auterion logo will no longer be orange which indicates you are now in Advanced Mode.
Click on the Auterion logo once to open the left menu panel.
Select Vehicle Setup.
Select Parameters.
In the upper right hand corner, select Tools.
Select Reset to vehicle's configuration defaults.
Select Reset to confirm.
Reboot PRISM Sky and Watts AMC for the reset to apply.
Once connected to the aircraft, check all parameters and settings to confirm settings and parameters were successfully reset to defaults.
Switch back to Normal Mode by clicking or tapping on the Auterion logo five (5) times.
Enable Always start AMC in normal mode by simply checking the box
Select Switch to Normal to confirm.
The Auterion logo will turn back to orange which indicates you are back in Normal Mode.
