PRISM Sky Gremsy Damping Plate Assembly

This section provides instructions for properly assembling the Gremsy Gimbal with the Toad In The Hole attachment.

The Gremsy Damping plate can be used to mount payloads underneath the aircraft and help eliminate any vibrations from the aircraft itself. The Toad in the hole quick release assembly makes it easy to attach various payloads and remove them from the aircraft once the user is done with them.

Items you will need:

	Gremsy Damping Plate Pro 2.0 (already assembled) FREEFLY Toad in the hole quick release set 4 x M3 Plastic Washers 4 x M3x12 Flat Head Bolts 4 x M3 Nyloc Nuts

Tools you will need:

• 3mm Hex Wrench

• 5.5mm nut driver or needle nose pliers

Attaching the Toad in the hole to the Gremsy plate

Step 1: Remove the dampeners from the center of the Gremsy plate as shown below.

Step 2: Apply Blue 243 Loctite to the M3 bolts protruding from the Toad in the hole mount and thread them into the M3 holes on the Gremsy mount. Align the Toad in the hole assembly as shown below in the photos. Tighten to 14 in-lbs.