Registering PRISM Sky with the FAA

This page outlines the steps for registering PRISM Sky as a Standard Remote ID aircraft using the FAA Drone Zone.

Public DOC List

In addition to meeting our Scope of Compliance, to ensure your PRISM Sky (serial number) is in compliance with Part 89 Remote ID regulations your aircraft must have an FAA-accepted Declaration of Compliance (DOC) listed on the Public DOC List in order to be able to register the aircraft via the FAA Drone Zone.

UAS Declaration of Complianceuasdoc.faa.gov

NOTE: If your unmanned aircraft (serial number) is not listed on the Public DOC List, you will not be able to register your aircraft.

FAA Drone Zone

Follow the instructions below to properly fill out you FAA registration for PRISM Sky:

1. Login or Create an Account with the FAA Drone Zone.

2. Launch Drone Owners and Pilots Dashboard

3. Navigate to your Part 107 Dashboard

4. Select Manage Device Inventory

5. Select Add Device

   • DOES YOUR DRONE BROADCAST FAA REMOTE ID INFORMATION?* - Select Yes (required)

   • UAS TYPE* - Select Standard Remote ID - required

   • NICKNAME - Enter nickname of your choice (example: PRISM Sky xxxx)

   • UAS MANUFACTURER* - Enter Watts Innovations - required

   • UAS MODEL* - Enter PRISM Sky - required

   • REMOTE ID SERIAL NUMBER* - Enter the entire serial number using the above format (example: 1785C00000000xxxx where xxxx would be the last four digits of the serial number assigned for your aircraft) - required

NOTE: Below is an example ONLY. The serial number used in the examples on this guide should NOT be used when registering your aircraft as it will be different from the serial number assigned to your PRISM Sky aircraft.

Example in FAA Drone Zone using above instructions